![bysoft 7 nesting tutorial bysoft 7 nesting tutorial](https://dq-blog-files.s3.amazonaws.com/devtools.png)
From here, click on the first oval hole near the top of the list to your left and click the Unassign Action button below. Now, switch to the Shifts tab to see the shifts that the Dragon machine will take in fabricating this project.ġ1. Next, click the Remove button and select these last two parts to delete them from the nesting design.ġ0. Now, click the Rotate button and rotate the last two parts in the design so that the two oval holes cross over both the top and bottom edges of the unfolded tube.ĩ. Then, drag this part the one on the end (tied to our part) near the end of the stock tube.Ĩ.
![bysoft 7 nesting tutorial bysoft 7 nesting tutorial](https://i.ytimg.com/vi/yhc7TBzmGc8/maxresdefault.jpg)
Still under the Parts tab, select the Move button from the bottom of the screen followed by the second to the last part in the design. Now, double click on our part five times to add 5 copies of it to our nesting design, or simply click the blue addition symbol to fill the stock length.ħ. Next, to add parts to the nesting project, click on the Parts tab.Ħ. Now click the Apply button to set the stock tube length in the display area to the right.ĥ. Now, maximize the screen and enter 140 into the Stock Length: value field to the left of the display screen. With the Dragon Design window open, click on the Transfer to Nesting drop down menu at the top of the screen and select the New Project option.ģ. Do this by selecting File - Open - Dragon Design from the top left of the window, selecting the file, then clicking the Open button.Ģ.
#Bysoft 7 nesting tutorial software#
Start by opening the Bend-Tech Dragon software and opening the file saved from the Dragon Custom Design Tutorial labeled Dragon Test2. If you have not completed the Dragon Straight Part Tutorial and Dragon Custom Design Tutorial, please do so before continuing any further.
![bysoft 7 nesting tutorial bysoft 7 nesting tutorial](https://www.metaalmagazine.nl/wp-content/uploads/2013/01/bysoft_7_nesting_functies.jpg)
Because of this, it is very important that you carefully step through this guide, understanding everything along the way. As you walk through this tutorial, procedures are designed based on your knowledge of earlier procedures. This tutorial will step you through the process of creating a nesting project in Bend-Tech Dragon and show you how simple it is to send your project to your Dragon machine.